Scooter Geschwindigkeitsregler Beschleunigungseinheit Kompatibel für Xiaomi 1S/Pro/Pro2 Scooter 38km

Preis
Normaler Preis CHF 101.00
Normaler Preis CHF 149.00 Sonderpreis CHF 101.00
CHF 48 günstiger
/
  • Kostenlose Lieferung innerhalb der Schweiz
  • 3-5 Tage Lieferzeit
  • Kauf auf Rechnung möglich
  • 14 Tage Rückgabegarantie mit kostenloser Retoure
  • Auf Lager
  • Nachbestellt, bald verfügbar
inkl. MwSt.

Marke: LUCK4U

Eigenschaften:

  • 【Supported Models】:Suitable for Xiaomi Pro, 1S, Pro2 electric scooter.
  • 【Usage steps】:Turn off the scooter; 2. Remove the four screws on the scooter pole, which are located under the scooter instrument, and keep these four screws; 3. Open the pole of your scooter, you will see the instrument connected to a wire, there
  • 5. Then put the tuningchip in the middle of the pole, and reinstall the 4 screws that have been removed; 6. Long press the power button of the BLE display to turn on the scooter; 7. Press the brake 3 times, then press the accelerator 3 times, the
  • 【Functions of WIFI webpage 】:You can set the number of switching operations. If the number of operations is called N value, this N value defaults to 3 times, and the setting range is 3-15 times. After the user sets the N value, and after restarting
  • 3. After the user sets "display maximum speed is 20km/h" on the WIFI page, no matter what the actual speed is, the BLE display will only show a maximum speed of 20km/h. After restarting the scooter, this setting is still effective and will not be
  • 【Scooter speed state switch】:1. The speed controller has 2 speed states: (1) Low speed state - the maximum speed is 20km/h. When leaving the factory, the default is "low speed state";(2) High speed state - the maximum speed is 38km/h. 2. How to
  • 3. After switching the speed state, unless the user changes the state by himself, this state is valid for a long time and is also valid after restarting. 4. After installing the speed controller, each time the user switches the speed state, the entire
  • (1) Press the brake N times first, then press the accelerator N times, the BLE display will alarm once and start switching the speed state. (2) When the user switches to the high-speed state, the BLE display shows the number 38. When switching to the
  • 【Supported controller main chip】: stm32, APM32.


Der Artikel ist innerhalb weniger Tage lieferbar, die Lieferzeit beträgt hierbei 3-5 Werktage.
Die Ware wird kostenlos mit der Schweizerischen Post oder DPD versendet.

Rückgabe von Ware gemäss AGB

  • Kostenlose Retouren innert 14 Tagen nach Erhalt
  • Die Gutschrift erfolgt zu 100% der Kaufsumme
  • zu Einzelheiten siehe Ziffer 8.0 und Ziffer 8.1. der AGB
Zuletzt Angesehen